Tecno CA7 Factory Signed Firmware Free Download

1 2,218

Tecno ca7 firmware free download CA7-H633BCDK-O-V2-190108V228 and Tecno ca7 clone firmware factory signed firmware and component flash file and Tecno ca7 da file are for repairing any

issues like google account lock FRP and long booting, updating, and much more. privacy protection lock reset. updating the os to another android version. Take heat while you use the device. unfortunately has to stop apps fixed. un control sensor touch screen fixed.

 

TOOLS REQUIRE AND FILE.

if you want to write any Tecno smartphone firmware today you must know what you should install and you must know the id number of the device firmware to avoid breaking,

1. Mediatek USB driver [download] must install on your pc.

2.spflashtools update version [v5.1924] Download. recommended.

3. you can use like cm2 dongle [require] external tools.

4. and EFT dongle if you have crack ok if not you should buy it [external]

5.MediaTek chipset multitools [external]

6. if you need to write Tecno CA7 Factory Signed Firmware Free Download Tecno ca7 da file with eft dongle, you must use boot file [da-file]

CHIPSET LIST.

Any firmware you can download you have to check and read the firmware id to avoid break after writing a wrong firmware “how can you to firmware id follow this instruction step by step.

 

HOW TO CHECK /READ FIRMWARE ID METHOD 1?

On your device: press the holding power and volume down button a moment until it enters factory mode. scroll down with the Volume key a little press on about you will see an id firmware if the above method did not work for as in your device it’s on critical condition then you have to

try method two.

 

HOW TO READ FIRMWARE ID METHOD 2?

Download an eft dongle software then install it screws open your device back cover the reset the battery pin then run the eft dongle software wait until open click on read info option plug USB cable to PC and mobile device; it will start reading it’ll be done the check firmware id number then

download exact it.

HOW TO CHECK FIRMWARE ID METHOD 3?

Switch on your device make sure it has a charge like 50% or above follow this instruction step by step. Go to setting> click on about > scroll down > you will see it: done.

 

IMPORTANT BACKUP DATA FILES.

writing firmware with id CA7-H633BCDK-O-V2-190108V228. Ensure you are ready to back up your data file to prevent loss start back-ups like music, videos, document, pdf file, and much more…

Related Posts
1 of 2

MUST BACKUP REQUIRE A LIST?

CA7-H633BCDK-O-V2-190108V228

nevram must backup.

personal data backup.

create an android backup.

 

HOW TO WRITE A FIRMWARE WITH SP FLASH TOOLS.

Firstly download the sp flash tools zip file extract it with WinRAR software to a specific folder on the desktop also extracts the firmware scatter file to a folder; then open an sp flash tools folder run the sp flash tools application wait until open load a scatter file,

then click start download connect the device it will start. while it starts downloading Don’t interrupt the process. make sure the device battery is has a charge of at least 50%

 

HOW TO WRITE A FIRMWARE WITH EFT DONGLE?

Download an eft dongle software zip file extract it with WinRAR software to a specific folder on

desktop locate it run the setup while is open load a scatter file click start connect USB to pc and

the mobile device will start to wait until done.

 

FIRMWARE LINKS.

Including tecno ca7 clone firmware

and tecno ca7 clone firmware

File CA7-H633BCDK-O-V2-190108V228

Free Without the password.

Free file size 1GB.

Tested 100%

Download below.

DOWNLOAD

Do you find Ngbaze useful? Click Here Give Us a five Stars Rating.

Show Comments (1)