Ngbaze-The Technology Revolution.

Tecno CA7 Factory Signed Firmware Free Download.

0 7

Tecno ca7 factory signed firmware and component flash file and Tecno ca7 da file are for repairing any issues like google account lock FRP and long booting, updating, and much more.

 

ISSUES FIXING LIST BELOW.

3. privacy protection lock reset.

4.updating the os to another android version.

5.taking heat while your using device.

6.unfortunetly has stop apps fixed.

9.un control sensor touch screen fixed.

Learn more

TOOLS REQUIRE AND FILE.

if you want to write any Tecno smartphone firmware today you must know what you should

install and you must know the id number of the device firmware to avoid breaking,

1. Mediatek USB driver [download] must install on your pc.

2.spflashtools update version [v5.1924] Download. recommended.

3.you can use like cm2 dongle [require] external tools.

4.and EFT dongle if you have crack ok if not you should buy it [external]

5.mediatek chipset multitools [external]

6.if you need to write Tecno CA7 Factory Signed Firmware Free Download Tecno ca7 da file with eft dongle, you must use boot file [da-file] download.

CHIPSET LIST.

Any firmware you can download you have to check and read the firmware id to avoid break after

writing a wrong firmware “how can you to firmware id follow this instruction step by step.

Meditek chipset mtpMT6763
project ca7_h633
storage Emmc
boot_channel MSDC

HOW TO CHECK /READ FIRMWARE ID #METHOD 1?

1.on you device: press hold power and volume down button a moment until it enter factory mode.

2.scroll down with volume key a little press on about you will see an id firmware ;

if the above method did not work for as in your device it’s on critical condition then you have to try method two.

HOW TO READ FIRMWARE ID #METHOD 2?

Download an eft dongle software then install it screws open your device back cover the reset the

battery pin then run the eft dongle software wait until open click on read info option plug USB

cable to PC and mobile device; it will start reading it’ll be done the check firmware id number then

download exact it.

Tecno CA7 Factory Signed Firmware

HOW TO CHECK FIRMWARE ID #METHOD 3?

Switch on your device make sure it has a charge like 50% or above follow this instruction step by step.

Go to setting> click on about > scroll down > you will see it: done.

IMPORTANT BACKUP DATA FILES.

writing a firmware Ensure your ready to backup your data file to prevent loss start back-ups like

music, videos, document, pdf file, and much more…

MUST BACKUP REQUIRE LIST.

nevram must backup.

personal data backup.

create an android backup.

HOW TO WRITE A FIRMWARE WITH SP FLASH TOOLS.

Firstly download sp flash tools zip file extract it with WinRAR software to a specific folder on

the desktop also extracts the firmware scatter file to a folder; then open an sp flash tools folder

run the sp flash tools application wait until open load a scatter file, then click start download

connect the device it will start.


NOTE.
while it starts downloading Don’t interrupt the process.

make sure the device battery is has a charge at list 50%

HOW TO WRITE A FIRMWARE WITH EFT DONGLE?

Download an eft dongle software zip file extract it with WinRAR software to a specific folder on

desktop locate it run the setup while is open load a scatter file click start connect USB to pc and

the mobile device will start to wait until done.

FIRMWARE INFORMATION.

ID CA7-H633BCDK-O-V2-190108V228
PASSWORD N/A
TESTED 100%
PRICE FREE FILE
LINK DIRECT
OFFICIAL FIRMWARE. DOWNLOAD LINK HERE.

 

 

Leave A Reply

Your email address will not be published.